Price: $4,499.00 - $3,189.00
(as of Apr 04, 2025 23:00:19 UTC – Details)
Experience the NXR Range, the all stainless steel professional style gas range designed to be the centerpiece of your kitchen. The NXR sleek design brings the look and feel of a commercial restaurant-style range into your home. The heart and soul of a range is the burner and the NXR Entree features world-class single-stack burners manufactured in Germany by Is hording. The NXR Entree offers the ultimate versatility and each burner has a purpose. Boil water quickly with the high power 18,000 BTU, simmer delicate sauces with the low power 6,000 BTU and everything in between. The 48 in. even has a 18,000 BTU griddle, instantly making breakfasts more fun. The re-ignition system is all about safety and will protect against gas buildup. The cooktop drip pan is made with black porcelain so spills can easily be cleaned up. Underneath it all, the NXR Entree is made up of globally sourced parts selected specifically to perform. The oven’s broiler will allow you to show off your cooking abilities – exposing your food directly to high heat, searing and sealing in flavor, perfect for quickly cooking thin cuts of meat. The convection fan will circulate air to promote even cooking, instantly boosting your baking repertoire. Whether you cook all the time or only on special occasions, fall in love with the cooking experience of the NXR Entree.
All stainless steel construction for a professional look
6 burners featuring high power 18,000 BTU and low power 6,000 BTU German made single-stack burners, 10,000 BTU broiler burner, 22,000 BTU oven burner
Convection fan allows for even cooking
Easy to clean black porcelain drip pan
Extra-large 7.2 cu. ft. oven capacity. Extra-large oven window provides better visibility and allows better monitoring so oven temperatures can be kept steady without opening the door
Mona Tseng –
Do not buy!
The gas range has green giving me issues pretty early on. Had it for 3 years and had to replace the igniter on the larger oven twice already and now the door hinge broke and wouldnât open (on Thanksgiving no less). Ordered a replacement door from Duro for $500 and it arrived damaged. Not in shipping, but some of the screws were tightened too much and dented the metal inward. The top of the door was warped as well so it wouldnât close even if installed (I tried). Called them about it and they sent me a second replacement door which also arrived with the top corners warpedâ¦really not sure what to do now. Side note: the matching hood gave me issues from day 1, highest setting rattles the fan. Do not buy.
Rami Nakhla –
Very good product.
Itâs a great product. It gives the feeling of an industrial kitchen. Perfect for modernizing your kitchen and most importantly works great.
Jeff H. –
Purchased on 2/26/2017
Oven Slides broke after 3 years and we are unable to find parts even on the NXR WebsiteThe Small oven from the start has never cooked well and maintains temperature very poorly.It was a budget buy at the time and was a regrettable choice looking back on it. basically it is a 48″ Dual oven range and only one side works well. The large oven has always seems to be a little cool about 30 degrees according to our thermometer. You get what you pay for in this case the oven’s are terrible. The range cooks well but the burners can be finicky at 100% and the igniter sometimes wants to keep igniting.
Justin F. –
Will never by again or suggest to anyone else to buy
I am not the average do it your self guy, I work with these type of products as a profession. The extremely heavy unit was sent out with one guy in a truck who could not have handled it on his own other than to drop it in the road and drive away.Arrangements were not made to let us know we needed help to unload it and get it into a secure place, not in the driveway.There were no directions to change from NG to Propane. The unit needs to be taken almost completely apart to perform the conversion after you watch a few YouTubers do it. The design is bad when any tasks are required for repairs or maintenance. The oven doors do not close properly and are actually burning the outside stainless steel by the door, no adjustment points are available but the appliance guy tried to bend them into place which did not work. The wiring on the switches were switched from the factory, Had to remove three panels to fix it. Burner went out after one year of use. The small oven burner also needed to be replaced after one year.The range hood comes with mounting brackets for a concrete wall and concrete anchors. The spacing does not work with standard stud wall framing and there is no mention of additional backing being required to properly prepare for the install of this product. I made my own brackets. You can not get access to the hood to vent connections to install screws behind the vent. It is very heavy and takes a few people to install so its not like you can take it up and down to get it right. They only make a vent cover for a 8′ ceiling to cover the duct work, I have not seen a 8′ ceiling in a house with a 48″ range in 25 years of being in the trades, 9′ ceilings are standard. We had to get a custom hood made. With less than a year of the unit being install the high range vent motor started squeaking loudly and it was only used a few times at most. An appliance repair guy came out to fix the range hood and the motor is screwed in from the back of the hood, which means the hood needs to be removed from the wall for the motor to be serviced. He was one guy so he went home with out fixing the hood, I will have to get some of my friends over to help remove the unit and rebuild it myself. When appliance repair guy unpackage the replacement part, a wire was cut on the new part.The appliance repair guy came with a cordless impact driver and a Leatherman. He did not have a gas meter with him to test pressures. He also came in a pick up truck with no name on it, they are not hiring top in.If you are a normal consumer this unit will cost you a pile of change orders to have your contractors install it. We purchased this unit because it did not have all the extras, we wanted a robust reliable unit that did not have all kinds of electronics to go bad. I am extremely disappointed in both of these products at the price point and if I did not have the skills and tools I have it would have cost us thousands of dollars to get it installed.Buy another product.
US Person of Interest –
Works great!
I love it! It’s a great way to cook for a large gathering. I just want another rack. I could make 3 sheets of cookies in the smaller oven if I just had another rack. *sigh* First World problems. ð
Evgeny Mezhiborsky –
Stay away!
Have model NXRPRO3651 for little over 2 years. Excellent initially become pain in the neck : within this 2 years 2 igniters failed (one replaced under the warranty, 3 top burners (I have dual burners model with ultra low simmer) warped and have flames coming from under the burner, inner burners have unstable flames (too much air flow cause flames to shut down or flatter and igniters to try to ignite the flames ) that will work at low set only. From research I found out that burners getting warped and this cause for the problem. One of the greatest become warped too, so pot placed in it unstable and may be a safety concern due to possible water splash on the burners. Not only I need multiple parts to be replaced (not cheap at all), but all the parts I need out of stock and will be back at unknown time in the next 1-1/2 to 2 month (according to their customer service). Not to mention parts were showed as in stock I ordered and couple days later ones I did not receive shipping information I called customer service, I notified that one of the parts not in stock and they will ship the order ones they get it restock. To receive another part from the order they recommended to cancel current order and place new one. Made it same day. Guess what, couple days later by asking customer service for order status, they notified me that the part is out of stock!!!!!So, if still want their product and not really care about it’s proper and complete functioning, does not worry about parts you need out of stock and useless customer service -go ahead and purchase it!